Deburring Machines
QuickWood is the manufacture of a few different deburring machines, the one that most customers has used for deburring metal parts in an automatic fashion is the Classic 1300 Vac. As the video below will show you this machine is very fast at deburring and making an radius to the edge. The machine is made up of 9 discs heads that each carry 12 slots of our deburring brush. This deburring brush will use the pressure of the brush to sand with regular sandpaper a burr off the edge or off a cut out in your metal part. This machine will work on stainless steel and aluminum parts.
Deburring Machine
As you can see in the video, the parts as small as credit card size can be suck down by the vaccum system that are in the belt and held in place while running through the machine. The parts will go in with sharp edges and burrs on the edges and come out clean with a breaken or radius edge. The amount of edge break that a client want can be adjusted by the RPM of the discs so the more RPM’s the bigger the edge break.
Related posts:
- Deburring brush The QuickWood deburring brush as shown in this video, is...
« Deburring brush | Home | MetalFinish – Working on your edge »
Leave a Comment
You must be logged in to post a comment.