Molding Sander
Molding Sander 4 heads
Molding Sanders with 4 heads, for sanding moldings on 3 sides. The QuickWood CD2 Series Molding sanders have two or more horizontal top spindles and can have two or more vertical side spindles and/or two or more horizontal bottom spindles to sand the various surfaces of the work pieces as needed. Molding sanders like are used to break sharp edges, remove fibers from the surface and to make the staining come out more even. If you are trying to remove deep knife marks it’s not the right sander. To do that job you would need a profile sander where the profile wheel is the same shape as the molding you are trying to sand. I have seen the brush sanders used in many shops as a finishing sander where to parts comes out very smooth and the profile is not changed. In some cases the machines are also used to remove very light knife marks but it’s not the norm.
This sander is better described on this page Molding sander
Moulding Sander 4 heads
Molding sander 6 heads
Molding Sander With 6 Heads for faster feed though speed as four heads will sand from the top and 2 heads will sand from the side. Steeping up to a 4 top head molding sander are going to give you a lot of freedom to use different grit on the 4 top heads and to run moldings that needs a little more sanding on the face maybe blend a little knife marks into the sanding lines of the molding sander.
Molding Sander 6 heads
8 Head molding sander
Molding sander with 8 heads and fully enclosed for better dust collection and faster feed speed.Industrial Molding Sander designed to handle linear board feet applications such as molding, siding, and flooring. This machine comes compete with a power driven pressure roller feed system, two top heads, two bottom heads and two head on either side to sand four surfaces simultaneously in a single pass. The feed rate and sanding heads are independently adjustable through use of frequency inverters. The pressure roller system, top head height, and left and right side sander heads are electrical adjustable. All heads will tilt and rotate to accommodate different styles and shapes of crown molding, shoe molding, and chair rail. The QL 1-2-3-4 will accept all QuickWood sanding media.
Moulding Sander 8 Heads
QuickWood has been making molding sanders since 1990 and we have a good bit of machines out in the market place, if your company are looking for the small easy molding sander CD2-300 or the best of the best QL1234 QuickWood will have the right molding sander to do the job for you.
Translator
Pages
QuickWood Newsletter
Leasing Options
-
Recent Posts
Tags
abrasives brush brush abrasives brushes brush sanders brush sanding cabinet color deal detail sander doors edge final sanding machine Finish sanding flap wheel flap wheels grit knife marks loose fibers machine Metal Molding moulding North America piece profile quickwood raw wood sander Sanders sanding machine sanding machines sandpaper sealer sharp edge sharp edges spindle spindles surface Used Quickwood Vac wheel whitewood sander wood wood distressing
